JEM # HPI-HPS-17HPS-17
BT30 retention knob, MAS 403 P30T-2, 60°, M12, solidBT3060°M12Solid
SpecificationsFrom Pioneer's catalog
- Taper
- BT30
- Style
- MAS 403 P30T-2
- Angle
- 60°
- Thread
- M12
- Overall length
- 1.693"
- Flange to end of knob
- .906"
- Knob Ø
- .433"
- Neck Ø
- .276"
- Coolant
- Solid
- Socket
- TWS-M13
Machines
Machines this knob is listed for
BT30, 60°, MAS 403 P30T-2.Verify firstListed as a guide only. Builders change knob specs between models, years and coolant options, so check your machine’s manual, or send us the make, model and serial number and we’ll confirm before you order. The wrong retention knob can let a holder pull out of the spindle.
| Builder | Machines | Taper |
|---|---|---|
| Brother | SPEEDIO (S300X1/X2, S500X1/X2, S700X1/X2, Xd1, M140X2, M200X3, H550Xd1, R450/R650) and older TC-S2A/S2C/R2A/22BCoolant-through takes the builder’s own knob | BT30 |
| Matsuura | 50-taper MC-1000V/1250V/1500V/2000V, MC-900H(G), H.Plus 50; BT30 small machines | BT50 / CAT50 / BT30 |
Don’t see your machine? Call the counter at 408-834-8656 with the make, model and serial number and we’ll find the right knob.
Pioneer’s dimensions
- Overall length (L1)
- 1.693"
- Head Ø (D1)
- .433"
- Neck Ø (D2)
- .276"
- Pilot Ø (D3)
- .492"
- Projection (L2)
- .906"
- Pull location (L3)
- .709"
- Flange (L4)
- .197"
- Hex flats (F)
- 13mm
- Thread
- M12
- Tightening socket
- TWS-M13