JEM # HPI-HPS-806U-1HPS-806U-1
CAT40 retention knob, JIS B6339, 15° (also called 75°), 5/8-11, coolant-through, O-ringCAT4015°5/8-11Coolant-through
SpecificationsFrom Pioneer's catalog
- Taper
- CAT40
- Style
- JIS B6339
- Angle
- 15° (also called 75°)
- Thread
- 5/8-11
- Overall length
- 2.000"
- Flange to end of knob
- 1.024"
- Knob Ø
- .748"
- Neck Ø
- .551"
- Coolant
- Coolant-through
- with O-ring
- Socket
- TWS-M19
Machines
Machines this knob is listed for
CAT40, 15° (also called 75°), JIS B6339.Verify firstListed as a guide only. Builders change knob specs between models, years and coolant options, so check your machine’s manual, or send us the make, model and serial number and we’ll confirm before you order. The wrong retention knob can let a holder pull out of the spindle.
| Builder | Machines | Taper |
|---|---|---|
| DMG MORI / Mori Seiki | Same series WITH through-spindle coolant (e.g. CMX 1100 V CTS option)Builder p/n J-022343 (option code, Special Center-Through knob, #40) | BT40 / CAT40 |
| Doosan / DN Solutions | Same series with CAT40 option | CAT40 |
| Kitamura | Current Mycenter / HX / Supercell (Mycenter-3XG, 4XiF, 7X, HX400G, HX500i-1250i, Supercell-400, Mytrunnion-5, Bridgecenter) | BT40 / CAT40 |
| Makino | a-series HMCs, PS/V-series VMCs (a51nx, a61nx, PS95, PS105, V33i, F3/F5 etc.), 40-taper | BT40 / CAT40 |
| Matsuura | Current MC/RA/MAM/FX/H.Plus/V.Plus/MX-520/VX-1000 40-taper | BT40 / CAT40 |
Don’t see your machine? Call the counter at 408-834-8656 with the make, model and serial number and we’ll find the right knob.
Pioneer’s dimensions
- Overall length (L1)
- 2.000"
- Head Ø (D1)
- .748"
- Neck Ø (D2)
- .551"
- Pilot Ø (D3)
- .641"
- Projection (L2)
- 1.024"
- Pull location (L3)
- .787"
- Flange (L4)
- .276"
- Coolant hole Ø (H)
- .236"
- Hex flats (F)
- 19mm
- Thread
- 5/8-11
- Tightening socket
- TWS-M19
Where Pioneer’s sources differ
- Pioneer lists the angle as 75°, the same knob Western catalogs call 15°.