Photo comingSpecifications below are JM Performance’s.
JM11146HT
CAT50 High Torque retention knob, 45°, 1-8, solidCAT5045°1-8Solid
SpecificationsFrom JM Performance's product pages
- Taper
- CAT50
- Style
- —
- Angle
- 45°
- Thread
- 1-8
- Flange to end of knob
- 1.000"
- Knob Ø
- 1.140"
- Neck Ø
- .820"
- Coolant
- Solid
- Socket
- RKW50
Machines
Machines this knob is listed for
CAT50, 45°.Verify firstListed as a guide only. Builders change knob specs between models, years and coolant options, so check your machine’s manual, or send us the make, model and serial number and we’ll confirm before you order. The wrong retention knob can let a holder pull out of the spindle.
| Builder | Machines | Taper |
|---|---|---|
| Mazak | 50-taper VCN/VTC/H/FH/Integrex/Variaxis 50 | CAT50 / BT50 |
JM Performance’s own machine guide lists this knob for Fadal (CAT50), Hurco (CAT50), Mazak (CAT50), SNK (CAT50). JM gives its machines as a reference only, not a guarantee.
Don’t see your machine? Call the counter at 408-834-8656 with the make, model and serial number and we’ll find the right knob.
JM Performance’s dimensions
- Knob Ø
- 1.140"
- Neck Ø
- .820"
- Flange to start of angle (L1)
- .700"
- Flange to end of knob (L2)
- 1.000"
- Flange thickness
- .200"
- Flange (shoulder) Ø
- 1.438"
- Pilot Ø
- 1.036"
- Wrench flats
- 1.245"
- Thread
- 1-8
- Tightening socket
- RKW50