T.J. DaviesJEM # TJD-PSC-585X45
PSC-585X45
BT30 retention knob, MAS 403 P30T-1, 45°, M12, coolant-throughBT3045°M12Coolant-through
SpecificationsFrom T.J. Davies's product pages
- Taper
- BT30
- Style
- MAS 403 P30T-1
- read from the dimensions
- Angle
- 45°
- Thread
- M12
- Overall length
- 1.692"
- Flange to end of knob
- .905"
- Knob Ø
- .431"
- Neck Ø
- .274"
- Coolant
- Coolant-through
- Socket
- RKS-BT30
Machines
Machines this knob is listed for
BT30, 45°, MAS 403 P30T-1.Verify firstListed as a guide only. Builders change knob specs between models, years and coolant options, so check your machine’s manual, or send us the make, model and serial number and we’ll confirm before you order. The wrong retention knob can let a holder pull out of the spindle.
| Builder | Machines | Taper |
|---|---|---|
| DMG MORI / Mori Seiki | BT30 compact machines (Milltap 700, Accumill 4000, Ultimill, MAX3000, TV-300/400) and other DMG MORI BT30 machines | BT30 |
| Haas | BT30 machines (DT-1, DM-1, DT-2, DM-2 drill/mill centers)Builder p/n 04-1420 (TSC, 10-pack), 04-1422 (TSC, single) | BT30 |
T.J. Davies’s own machine guide lists this knob for Fadal (BT30). T.J. Davies calls its guide general, not a guarantee.
Don’t see your machine? Call the counter at 408-834-8656 with the make, model and serial number and we’ll find the right knob.
T.J. Davies’s dimensions
- Overall length
- 1.692"
- Knob Ø
- .431"
- Neck Ø
- .274"
- Flange to end of knob
- .905"
- Flange to start of thread
- .707"
- Thread
- M12
- Tightening socket
- RKS-BT30