DVH42414C
Ø 3/8"4 FL7/8" LOC2-1/2" OAL
Photo and drawing
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 3/8"9.525 mm
- tol -.000" to -.002"
- Shank Ø
- 3/8"9.525 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 7/8"22.225 mm
- Reach
- 7/8"22.225 mm
- standard (= LOC), no neck
- Overall length
- 2-1/2"63.5 mm
- Flutes
- 4
- Helix
- 38°
- variable
- Coating
- AlTiN
- Aluminum Titanium Nitride
- Material
- PMS
- Steel, Stainless, Superalloys & titanium
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings3/8"9.525 mm · 4 FL
| Length | AlTiN | XP | Uncoated |
|---|---|---|---|
| 1/2" LOC · 2" OAL | DVH42408C$78.00 | DVH42408XP$85.00 | — |
| 9/16" LOC · 2-1/2" OAL | 200-4375$29.06 | — | 192-4375$28.19 |
| 3/4" LOC · 2-1/2" OAL | DVH42412C$95.00 | DVH42412XP$105.00 | — |
| 7/8" LOC · 2-1/2" OAL | DVH42414C$95.00this | DVH42414XP$105.00 | — |
| 7/8" LOC · 5" OAL | DVH424140C$154.00 | DVH424140XP$170.00 | — |
| 1" LOC · 2-1/2" OAL | DVH42416C$98.00 | DVH42416XP$108.00 | — |
| 1-1/4" LOC · 3" OAL | DVH42420C$112.00 | DVH42420XP$122.00 | — |
| 1-1/2" LOC · 4" OAL | DVH42424C$138.00 | DVH42424XP$151.00 | — |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 3/8" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM037-01753/8" bore · 1.75" gauge$84.03In stock - Shrink fit holder
CAT40-SD037-080-B-X3/8" bore · 3.15" gauge · dual contact$296.89Ships from Pioneer - ER32 collet chuck + collet
CAT40-ER32-0106ER32 · 1.06" gaugeER32-0375ER32 3/8" collet$174.37In stock