DVH52016XP
Ø 5/16"5 FL1" LOC3" OAL
Drawing · generated from specs
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 5/16"7.938 mm
- tol -.000" to -.002"
- Shank Ø
- 5/16"7.938 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 1"25.4 mm
- Reach
- 1"25.4 mm
- standard (= LOC), no neck
- Overall length
- 3"76.2 mm
- Flutes
- 5
- Helix
- 38°
- variable
- Coating
- XP
- AlCrN-based
- Material
- MPSKH
- Stainless, Steel, Superalloys & titanium, Cast iron, Hardened steel
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings5/16"7.938 mm · 5 FL
| Length | AlTiN | Venom | XP | Uncoated | Xtreme |
|---|---|---|---|---|---|
| 7/16" LOC · 2" OAL | DVH52007C$62.00 | DVH52007VP$71.00 | DVH52007XP$69.00 | — | — |
| 1/2" LOC · 2" OAL | — | — | — | P52008$52.00 | P52008X$57.00 |
| 1/2" LOC · 2-1/2" OAL | — | — | — | P52008D$80.00 | P52008DX$94.00 |
| 13/16" LOC · 2-1/2" OAL | DVH52013C$77.00 | DVH52013VP$90.00 | DVH52013XP$87.00 | P52013$63.00 | P52013X$70.00 |
| 1" LOC · 3" OAL | DVH52016C$85.00 | DVH52016VP$98.00 | DVH52016XP$95.00this | — | — |
| 1-1/8" LOC · 2-1/2" OAL | — | — | — | P52018$66.00 | P52018X$73.00 |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 5/16" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM031-01755/16" bore · 1.75" gauge$104.76In stock - Shrink fit holder
CAT40-SD031-1605/16" bore · 6.30" gauge$383.82Ships from Pioneer - ER32 collet chuck + collet
CAT40-ER32-0106ER32 · 1.06" gaugeER32-0312ER32 5/16" collet$174.37In stock