DVH52408C
Ø 3/8"5 FL1/2" LOC2" OAL
Photo and drawing
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 3/8"9.525 mm
- tol -.000" to -.002"
- Shank Ø
- 3/8"9.525 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 1/2"12.7 mm
- Reach
- 1/2"12.7 mm
- standard (= LOC), no neck
- Overall length
- 2"50.8 mm
- Flutes
- 5
- Helix
- 38°
- variable
- Coating
- AlTiN
- Aluminum Titanium Nitride
- Material
- PMS
- Steel, Stainless, Superalloys & titanium
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings3/8"9.525 mm · 5 FL
| Length | AlTiN | Venom | XP | Uncoated | Xtreme |
|---|---|---|---|---|---|
| 1/2" LOC · 2" OAL | DVH52408C$78.00this | DVH52408VP$88.00 | DVH52408XP$86.00 | — | — |
| 9/16" LOC · 2-1/2" OAL | — | — | — | P52409D$104.00 | P52409DX$118.00 |
| 5/8" LOC · 2" OAL | — | — | — | P52410$68.00 | P52410X$74.00 |
| 3/4" LOC · 2-1/2" OAL | DVH52412C$96.00 | DVH52412VP$108.00 | DVH52412XP$106.00 | — | — |
| 1" LOC · 2-1/2" OAL | — | — | — | P52416$85.00 | P52416X$92.00 |
| 1" LOC · 3" OAL | DVH52416C$109.00 | DVH52416VP$122.00 | DVH52416XP$119.00 | — | — |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 3/8" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM037-01753/8" bore · 1.75" gauge$84.03In stock - Shrink fit holder
CAT40-SD037-080-B-X3/8" bore · 3.15" gauge · dual contact$296.89Ships from Pioneer - ER32 collet chuck + collet
CAT40-ER32-0106ER32 · 1.06" gaugeER32-0375ER32 3/8" collet$174.37In stock