DVH53240XP
Ø 1/2"5 FL2-1/2" LOC5" OAL
Drawing · generated from specs
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 1/2"12.7 mm
- tol -.000" to -.002"
- Shank Ø
- 1/2"12.7 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 2-1/2"63.5 mm
- Reach
- 2-1/2"63.5 mm
- standard (= LOC), no neck
- Overall length
- 5"127 mm
- Flutes
- 5
- Helix
- 38°
- variable
- Coating
- XP
- AlCrN-based
- Material
- MPSKH
- Stainless, Steel, Superalloys & titanium, Cast iron, Hardened steel
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings1/2"12.7 mm · 5 FL
| Length | AlTiN | Venom | XP | Uncoated | Xtreme |
|---|---|---|---|---|---|
| 1-1/4" LOC · 3-1/4" OAL | JFKQC-16M5LN$44.53 | — | — | — | — |
| 1-1/2" LOC · 4" OAL | — | — | — | P53224$195.00 | P53224X$206.00 |
| 1-5/8" LOC · 4" OAL | DVH53226C$219.00 | DVH53226VP$241.00 | DVH53226XP$236.00 | — | — |
| 2" LOC · 4" OAL | — | — | — | P53232$205.00 | P53232X$216.00 |
| 2-1/8" LOC · 4" OAL | DVH53234C$229.00 | DVH53234VP$251.00 | DVH53234XP$246.00 | — | — |
| 2-1/2" LOC · 5" OAL | DVH53240C$275.00 | DVH53240VP$300.00 | DVH53240XP$295.00this | — | — |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 1/2" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM050-01751/2" bore · 1.75" gauge$84.90In stock - Shrink fit holder
CAT40-SD050-080-B-X1/2" bore · 3.15" gauge · dual contact$296.89Ships from Pioneer - ER32 collet chuck + collet
CAT40-ER32-0106ER32 · 1.06" gaugeER32-0500ER32 1/2" collet$174.37Ships from Pioneer