DVHR42414RC
Ø 3/8"4 FL7/8" LOC2-1/2" OALR .015
Drawing · generated from specs
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 3/8"9.525 mm
- tol -.000" to -.002"
- Shank Ø
- 3/8"9.525 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 7/8"22.225 mm
- Reach
- 7/8"22.225 mm
- standard (= LOC), no neck
- Overall length
- 2-1/2"63.5 mm
- Corner radius
- R .015–.020"R 0.381–0.508 mm
- published as a range
- Flutes
- 4
- Flute profile
- Rougher
- Serrated roughing profile for heavy stock removal
- Helix
- 38°
- variable
- Coating
- AlTiN
- Aluminum Titanium Nitride
- Material
- PMS
- Steel, Stainless, Superalloys & titanium
- Tool material
- Solid carbide
- End
- Corner radius
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings3/8"9.525 mm · 4 FL · R .015–.020"R 0.381–0.508 mm · Rougher
| Length | AlTiN | XP |
|---|---|---|
| 1/2" LOC · 2" OAL | DVHR42408RC$103.00 | DVHR42408RXP$111.00 |
| 1/2" LOC · 4" OAL | DVHR4240815RC$164.00 | — |
| 1/2" LOC · 4-1/2" OAL | — | DVHR4240815RXP$195.00 |
| 7/8" LOC · 2-1/2" OAL | DVHR42414RC$121.00this | DVHR42414RXP$131.00 |
| 7/8" LOC · 5" OAL | DVHR424140RC$181.00 | DVHR424140RXP$197.00 |
| 1" LOC · 2-1/2" OAL | DVHR42416RC$126.00 | DVHR42416RXP$136.00 |
| 1-1/4" LOC · 3" OAL | DVHR42420RC$142.00 | DVHR42420RXP$152.00 |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 3/8" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM037-01753/8" bore · 1.75" gauge$84.03In stock - Shrink fit holder
CAT40-SD037-080-B-X3/8" bore · 3.15" gauge · dual contact$296.89Ships from Pioneer - ER32 collet chuck + collet
CAT40-ER32-0106ER32 · 1.06" gaugeER32-0375ER32 3/8" collet$174.37In stock