JEM # HPI-S100-EM050-0600S100-EM050-0600
1" straight shank end mill adapter, 1/2", 6.00" gauge1" shankBore 1/2"6.00" long
SpecificationsFrom Pioneer's catalog
- Taper
- Straight shank
- Type
- End mill adapter
- Bore
- 1/2"
- Shank Ø
- 1"
- Length
- 6.00"
Goes with itNamed in Pioneer's catalog
SCW-EM04ENDMILL SCREW 1/4-28 X 0.25"$6.31
Other versions and cutters
straight end mill adapters, every bore and length6 in all
| Length | 1/8" | 3/16" | 1/4" | 5/16" | 3/8" | 1/2" |
|---|---|---|---|---|---|---|
| 6.00" | S075-EM012-0600$148.12 | S075-EM018-0600$148.12 | S075-EM025-0600$124.63 | S075-EM031-0600$124.63 | S100-EM037-0600$124.63 | S100-EM050-0600$124.63this |
Indexable cutters with a 1/2" shank19 Walter bodies. Inserts are on each cutter's page.
All with filters →Type
| Part no. | Designation | Type | Ø | Teeth | Approach | Insert | Stock | Price | Add |
|---|---|---|---|---|---|---|---|---|---|
| TUN-6955689 | EVLX06U0.50C0.50R02L | Chamfer and profile mill | .500" | 2 | 90° | LX0602 | Ships from Tungaloy | $325.80 | |
| TUN-6725775 | EBFU037T050S0400 | Copy mill | .375" | 1 | — | — | Ships from Tungaloy | $214.25 | |
| 8092801 | M5460.009-W13-02-05 | Copy mill | .375" | 2 | — | P3204-D09.52 | Ships from Walter | $330.00 | |
 8092809 | M5460.009-A13-02-05 | Copy mill | .375" | 2 | — | P3204-D09.52 | Ships from Walter | $300.00 | |
| TUN-6725777 | EBFU050S050S0437 | Copy mill | .500" | 1 | — | — | Ships from Tungaloy | $262.60 | |
| TUN-6725802 | EBFU050S050C0637 | Copy mill | .500" | 1 | — | — | Ships from Tungaloy | $964.25 | |
| TUN-6781792 | EXLS02U0.50C0.50LH2.00R02 | Copy mill | .500" | 2 | 12° | LS0202 | Ships from Tungaloy | $376.45 | |
| 8092850 | M5460.013-A13-02-06 | Copy mill | .500" | 2 | — | P3204-D12.7 | Ships from Walter | $316.00 |