P56424X
Ø 1"5 FL1-1/2" LOC4" OAL
Drawing · generated from specs
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 1"25.4 mm
- tol -.000" to -.002"
- Shank Ø
- 1"25.4 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 1-1/2"38.1 mm
- Reach
- 1-1/2"38.1 mm
- standard (= LOC), no neck
- Overall length
- 4"101.6 mm
- Flutes
- 5
- Coating
- Xtreme
- Titanium Aluminum Nitride
- Material
- PN
- Steel, Non-ferrous
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings1"25.4 mm · 5 FL
| Length | AlTiN | Venom | XP | Uncoated | Xtreme |
|---|---|---|---|---|---|
| 1-1/4" LOC · 4" OAL | DVH56420C$691.00 | DVH56420VP$726.00 | DVH56420XP$718.00 | — | — |
| 1-1/2" LOC · 4" OAL | — | — | — | P56424$651.00 | P56424X$671.00this |
| 2" LOC · 4" OAL | — | — | — | P56432$668.00 | P56432X$689.00 |
| 2" LOC · 5" OAL | DVH56432C$867.00 | DVH56432VP$899.00 | DVH56432XP$889.00 | — | — |
| 2-1/2" LOC · 5" OAL | — | — | — | P56440$820.00 | P56440X$842.00 |
| 2-5/8" LOC · 5" OAL | DVH56442C$889.00 | DVH56442VP$921.00 | DVH56442XP$911.00 | — | — |
| 3-1/4" LOC · 6" OAL | DVH56452C$1,079.00 | DVH56452VP$1,115.00 | DVH56452XP$1,104.00 | P56452$1,007.00 | P56452X$1,033.00 |
| 4" LOC · 7" OAL | — | — | — | P56464$1,136.00 | P56464X$1,165.00 |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 1" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM100-01751" bore · 1.75" gauge$93.89In stock - Shrink fit holder
CAT40-SD100-1601" bore · 6.30" gauge$373.16Ships from Pioneer - ER40 collet chuck + collet
CAT40-ER40-0250ER40 · 2.50" gaugeER40-1000ER40 1" collet$194.23Ships from Pioneer