R64024RVP
Ø 5/8"6 FL1-1/2" LOC4" OAL
Drawing · generated from specs
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 5/8"15.875 mm
- tol -.000" to -.002"
- Shank Ø
- 5/8"15.875 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 1-1/2"38.1 mm
- Reach
- 1-1/2"38.1 mm
- standard (= LOC), no neck
- Overall length
- 4"101.6 mm
- Flutes
- 6
- Helix
- 38°
- variable
- Coating
- Venom
- AlTiN/TiSiXN-based
- Material
- MPSKH
- Stainless, Steel, Superalloys & titanium, Cast iron, Hardened steel
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings5/8"15.875 mm · 6 FL
| Length | AlTiN | Venom | XP |
|---|---|---|---|
| 3/4" LOC · 3" OAL | R64012C$230.00 | R64012VP$249.00 | R64012XP$245.00 |
| 3/4" LOC · 5" OAL | R6401218C$344.00 | R6401218VP$374.00 | R6401218XP$368.00 |
| 1-1/4" LOC · 3-1/2" OAL | R64020C$272.00 | R64020VP$296.00 | R64020XP$291.00 |
| 1-1/4" LOC · 6" OAL | R640200C$414.00 | R640200VP$449.00 | R640200XP$441.00 |
| 1-1/2" LOC · 4" OAL | R64024C$305.00 | R64024RVP$328.00this | R64024XP$323.00 |
| 2-1/4" LOC · 5" OAL | R64036C$357.00 | R64036VP$387.00 | R64036XP$381.00 |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 5/8" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM062-01755/8" bore · 1.75" gauge$84.03In stock - Shrink fit holder
CAT40-SD062-1605/8" bore · 6.30" gauge$373.16Ships from Pioneer - ER32 collet chuck + collet
CAT40-ER32-0106ER32 · 1.06" gaugeER32-0625ER32 5/8" collet$174.37In stock