R66436C
Ø 1"6 FL2-1/4" LOC5" OAL
Drawing · generated from specs
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 1"25.4 mm
- tol -.000" to -.002"
- Shank Ø
- 1"25.4 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 2-1/4"57.15 mm
- Reach
- 2-1/4"57.15 mm
- standard (= LOC), no neck
- Overall length
- 5"127 mm
- Flutes
- 6
- Helix
- 38°
- variable
- Coating
- AlTiN
- Aluminum Titanium Nitride
- Material
- PMS
- Steel, Stainless, Superalloys & titanium
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings1"25.4 mm · 6 FL
| Length | AlTiN | Venom | XP |
|---|---|---|---|
| 1" LOC · 3" OAL | R66416C$557.00 | R66416VP$584.00 | R66416XP$577.00 |
| 1-1/2" LOC · 4" OAL | R66424C$702.00 | R66424VP$737.00 | R66424XP$729.00 |
| 1-1/2" LOC · 6" OAL | R664240C$1,020.00 | R664240VP$1,056.00 | R664240XP$1,045.00 |
| 1-1/2" LOC · 7" OAL | R6642400C$1,133.00 | R6642400VP$1,171.00 | R6642400XP$1,158.00 |
| 2-1/4" LOC · 5" OAL | R66436C$878.00this | R66436VP$911.00 | R66436XP$901.00 |
| 3-1/4" LOC · 6" OAL | — | R66452VP$1,118.00 | R66452XP$1,107.00 |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 1" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM100-01751" bore · 1.75" gauge$93.89In stock - Shrink fit holder
CAT40-SD100-1601" bore · 6.30" gauge$373.16Ships from Pioneer - ER40 collet chuck + collet
CAT40-ER40-0250ER40 · 2.50" gaugeER40-1000ER40 1" collet$194.23Ships from Pioneer