JEM # SCH-14206321420632
BT50 TENDO E compact hydraulic chuck, 20 mm, 130 mm gaugeBT50Bore 20 mm130 mm GL
SpecificationsFrom SCHUNK's catalog
- Taper
- BT50
- Type
- Hydraulic chuck
- Line
- TENDO E compact
- Bore
- 20 mm
- Gauge length
- 130 mm
- from the gauge line
- Nose Ø
- 42 mm
- Balance
- G2.5 @ 25,000 RPM
Goes with itNamed in SCHUNK's catalog
9205650TENDO hex wrench, SW 5 × 100 mm, cross handle$9.00
Sleeves and other versions
Retention knob for BT50The knob depends on your machine, not the holder. Find yours by builder.Find by machine →
Intermediate sleeves for a 20 mm bore48 GZB-S sleeves: clamp a smaller shank in this chuck
All with filters →Type
| Part no. | Tool shank | Type | Stock | Price | Add |
|---|---|---|---|---|---|
| 207920 | 3 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
 217920 | 3 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 | |
| 224434 | 1/8" | Coolant-proof sleeve | Ships from SCHUNK | $186.00 | |
| 217880 | 1/8" | Peripheral-cooling sleeve | Ships from SCHUNK | $186.00 | |
| 207921 | 4 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
| 217921 | 4 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 | |
| 224435 | 3/16" | Coolant-proof sleeve | Ships from SCHUNK | $186.00 | |
| 217881 | 3/16" | Peripheral-cooling sleeve | In stock | $186.00 | |
| 207922 | 5 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
| 217922 | 5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 |
BT50 TENDO E compact hydraulic chucks, every bore and length6 in all
| Gauge | 12 mm | 20 mm | 32 mm |
|---|---|---|---|
| 69 mm | 206444$557.00 | — | — |
| 83.5 mm | — | 206446$557.00 | — |
| 90 mm | — | — | 206448$557.00 |
| 130 mm | — | 1420632$783.00this | 1420633$783.00 |