JEM # SCH-14420161442016
BT30 TENDO Slim 4ax hydraulic chuck, 8 mm, 80 mm gaugeBT30Bore 8 mm80 mm GLCoolant thru
SpecificationsFrom SCHUNK's catalog
- Taper
- BT30
- Type
- Hydraulic chuck
- Line
- TENDO Slim 4ax
- Bore
- 8 mm
- Gauge length
- 80 mm
- from the gauge line
- Nose Ø
- 27 mm
- Coolant
- Coolant thru
- Balance
- G2.5 @ 25,000 RPM
Goes with itNamed in SCHUNK's catalog
9205650TENDO hex wrench, SW 5 × 100 mm, cross handle$9.00
Sleeves and other versions
Retention knob for BT30The knob depends on your machine, not the holder. Find yours by builder.Find by machine →
Intermediate sleeves for a 8 mm bore12 GZB-S sleeves: clamp a smaller shank in this chuck
All with filters →| Part no. | Tool shank | Type | Stock | Price | Add |
|---|---|---|---|---|---|
| 206237 | 1 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $264.00 | |
| 206242 | 1.5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $264.00 | |
| 206247 | 2 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $264.00 | |
| 206252 | 2.5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $264.00 | |
| 206257 | 3 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 217955 | 1/8" | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206262 | 3.5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206267 | 4 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206272 | 4.5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206277 | 5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206282 | 5.5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206287 | 6 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 |
BT30 TENDO Slim 4ax hydraulic chucks, every bore and length6 in all
| Gauge | 6 mm | 8 mm | 10 mm | 12 mm | 16 mm | 20 mm |
|---|---|---|---|---|---|---|
| 80 mm | 1442015$659.00 | 1442016$659.00this | 1442017$659.00 | 1442018$659.00 | 1442019$659.00 | — |
| 90 mm | — | — | — | — | — | 1442020$659.00 |