JEM # SCH-204455204455
BT50 TENDO Platinum hydraulic chuck, 12 mm, 90 mm gaugeBT50Bore 12 mm90 mm GLCoolant thru
SpecificationsFrom SCHUNK's catalog
- Taper
- BT50
- Type
- Hydraulic chuck
- Line
- TENDO Platinum
- Bore
- 12 mm
- Gauge length
- 90 mm
- from the gauge line
- Nose Ø
- 32 mm
- Coolant
- Coolant thru
- Balance
- G2.5 @ 25,000 RPM
Goes with itNamed in SCHUNK's catalog
9205650TENDO hex wrench, SW 5 × 100 mm, cross handle$9.00
Sleeves and other versions
Retention knob for BT50The knob depends on your machine, not the holder. Find yours by builder.Find by machine →
Intermediate sleeves for a 12 mm bore24 GZB-S sleeves: clamp a smaller shank in this chuck
All with filters →Type
| Part no. | Tool shank | Type | Stock | Price | Add |
|---|---|---|---|---|---|
| 207910 | 3 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
 217910 | 3 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 | |
| 224429 | 1/8" | Coolant-proof sleeve | Ships from SCHUNK | $186.00 | |
| 217900 | 1/8" | Peripheral-cooling sleeve | Ships from SCHUNK | $186.00 | |
| 207911 | 4 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
| 217911 | 4 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 | |
| 224430 | 3/16" | Coolant-proof sleeve | Ships from SCHUNK | $186.00 | |
| 217901 | 3/16" | Peripheral-cooling sleeve | Ships from SCHUNK | $186.00 | |
| 207912 | 5 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
| 217912 | 5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 |
BT50 TENDO Platinum hydraulic chucks, every bore and length6 in all
| Gauge | 12 mm | 1/2" | 20 mm | 32 mm |
|---|---|---|---|---|
| 90 mm | 204455$836.00this | — | 204457$836.00 | — |
| 3.54" | — | 205183$1,179.00 | — | — |
| 120 mm | — | — | — | 204458$836.00 |
| 140 mm | 204461$1,040.00 | — | 204463$1,040.00 | — |