JEM # SCH-206434206434
BT40 TENDO E compact hydraulic chuck, 12 mm, 58 mm gaugeBT40Bore 12 mm58 mm GL
SpecificationsFrom SCHUNK's catalog
- Taper
- BT40
- Type
- Hydraulic chuck
- Line
- TENDO E compact
- Bore
- 12 mm
- Gauge length
- 58 mm
- from the gauge line
- Nose Ø
- 42 mm
- Balance
- G2.5 @ 25,000 RPM
Goes with itNamed in SCHUNK's catalog
9205650TENDO hex wrench, SW 5 × 100 mm, cross handle$9.00
Sleeves and other versions
Retention knob for BT40The knob depends on your machine, not the holder. Find yours by builder.Find by machine →
Intermediate sleeves for a 12 mm bore24 GZB-S sleeves: clamp a smaller shank in this chuck
All with filters →Type
| Part no. | Tool shank | Type | Stock | Price | Add |
|---|---|---|---|---|---|
| 207910 | 3 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
 217910 | 3 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 | |
| 224429 | 1/8" | Coolant-proof sleeve | Ships from SCHUNK | $186.00 | |
| 217900 | 1/8" | Peripheral-cooling sleeve | Ships from SCHUNK | $186.00 | |
| 207911 | 4 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
| 217911 | 4 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 | |
| 224430 | 3/16" | Coolant-proof sleeve | Ships from SCHUNK | $186.00 | |
| 217901 | 3/16" | Peripheral-cooling sleeve | Ships from SCHUNK | $186.00 | |
| 207912 | 5 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
| 217912 | 5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 |
BT40 TENDO E compact hydraulic chucks, every bore and length11 in all
| Gauge | 12 mm | 1/2" | 16 mm | 3/4" | 20 mm | 32 mm |
|---|---|---|---|---|---|---|
| 58 mm | 206434$377.00this | — | — | — | — | — |
| 2.28" | — | 1324761$674.00 | — | — | — | — |
| 72.5 mm | — | — | 206435$377.00 | — | 206436$377.00 | — |
| 2.85" | — | — | — | 1324762$674.00 | — | — |
| 120 mm | — | — | — | — | — | 1340112$562.00 |
| 130 mm | 1420629$626.00 | — | 1431659$626.00 | — | 20064499$626.00 | — |