JEM # SCH-206596206596
BT40 dual contact TENDO E compact hydraulic chuck, 20 mm, 72.5 mm gaugeBT40Bore 20 mm72.5 mm GLDual contact
SpecificationsFrom SCHUNK's catalog
- Taper
- BT40
- dual contact (face and taper)
- Type
- Hydraulic chuck
- Line
- TENDO E compact
- Bore
- 20 mm
- Gauge length
- 72.5 mm
- from the gauge line
- Nose Ø
- 49.3 mm
- Balance
- G2.5 @ 25,000 RPM
Goes with itNamed in SCHUNK's catalog
9205650TENDO hex wrench, SW 5 × 100 mm, cross handle$9.00
Sleeves and other versions
Retention knob for BT40The knob depends on your machine, not the holder. Find yours by builder.Find by machine →
Intermediate sleeves for a 20 mm bore48 GZB-S sleeves: clamp a smaller shank in this chuck
All with filters →Type
| Part no. | Tool shank | Type | Stock | Price | Add |
|---|---|---|---|---|---|
| 207920 | 3 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
 217920 | 3 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 | |
| 224434 | 1/8" | Coolant-proof sleeve | Ships from SCHUNK | $186.00 | |
| 217880 | 1/8" | Peripheral-cooling sleeve | Ships from SCHUNK | $186.00 | |
| 207921 | 4 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
| 217921 | 4 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 | |
| 224435 | 3/16" | Coolant-proof sleeve | Ships from SCHUNK | $186.00 | |
| 217881 | 3/16" | Peripheral-cooling sleeve | In stock | $186.00 | |
| 207922 | 5 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
| 217922 | 5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 |
BT40 TENDO E compact hydraulic chucks, every bore and length11 in all
| Gauge | 12 mm | 1/2" | 16 mm | 3/4" | 20 mm | 32 mm |
|---|---|---|---|---|---|---|
| 58 mm | 206594$674.00 | — | — | — | — | — |
| 2.28" | — | 1324761$674.00 | — | — | — | — |
| 72.5 mm | — | — | 206435$377.00 | — | 206596$674.00this | — |
| 2.85" | — | — | — | 1324762$674.00 | — | — |
| 120 mm | — | — | — | — | — | 1340112$562.00 |
| 130 mm | 1420629$626.00 | — | 1431659$626.00 | — | 20064499$626.00 | — |