V2240809
Ø 3/8"2 FL1/2" LOC2-1/2" OAL
Photo and drawing
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 3/8"9.525 mm
- tol -.0001" to -.0003"
- Shank Ø
- 3/8"9.525 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 1/2"12.7 mm
- Reach
- 1-1/8"28.575 mm
- neck Ø .355"9.017 mm (standard)
- Overall length
- 2-1/2"63.5 mm
- Flutes
- 2
- Helix
- 45°
- Coating
- Uncoated
- Material
- N
- Non-ferrous
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings3/8"9.525 mm · 2 FL
| Length | Uncoated | Stealth | Super Stealth |
|---|---|---|---|
| 1/2" LOC · 2" OAL | V22408$67.00 | V22408S$73.00 | V22408SS$74.00 |
| 1/2" LOC · 2-1/2" OAL | V2240809$87.00this | V2240809S$95.00 | V2240809SS$97.00 |
| 1/2" LOC · 4" OAL | V224080$105.00 | V224080S$115.00 | V224080SS$117.00 |
| 5/8" LOC · 2" OAL | V22410$67.00 | V22410S$73.00 | V22410SS$74.00 |
| 3/4" LOC · 2-1/2" OAL | V22412$79.00 | V22412S$87.00 | V22412SS$89.00 |
| 1" LOC · 2-1/2" OAL | V22416$83.00 | V22416S$91.00 | V22416SS$93.00 |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 3/8" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM037-01753/8" bore · 1.75" gauge$84.03In stock - Shrink fit holder
CAT40-SD037-080-B-X3/8" bore · 3.15" gauge · dual contact$296.89Ships from Pioneer - ER32 collet chuck + collet
CAT40-ER32-0106ER32 · 1.06" gaugeER32-0375ER32 3/8" collet$174.37In stock