V308030
Ø 1/8"3 FL3/16" LOC2" OAL
Drawing · generated from specs
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 1/8"3.175 mm
- Shank Ø
- 3/16"4.762 mm
- Length of cut
- 3/16"4.762 mm
- Reach
- 3/16"4.762 mm
- standard (= LOC), no neck
- Overall length
- 2"50.8 mm
- Flutes
- 3
- Helix
- 45°
- Coating
- Uncoated
- Material
- N
- Non-ferrous
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings1/8"3.175 mm · 3 FL
| Length | Uncoated | Stealth | Super Stealth | Xtreme |
|---|---|---|---|---|
| 3/16" LOC · 1-1/2" OAL | V3080304$27.00 | V3080304S$30.00 | V3080304SS$31.00 | — |
| 3/16" LOC · 2" OAL | V308030$38.00this | V308030QS$56.00 | V308030QSS$58.00 | — |
| 3/16" LOC · 2-1/2" OAL | V308001$63.00 | — | — | — |
| 1/4" LOC · 1-1/2" OAL | P30804D$38.00 | V30804S$25.00 | V30804SS$25.00 | — |
| 1/4" LOC · 3" OAL | V308040$25.00 | V308040S$29.00 | V308040SS$30.00 | — |
| 5/16" LOC · 1-1/2" OAL | P30805$22.00 | V30805S$26.00 | V30805SS$26.00 | P30805X$25.00 |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 3/16" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM018-01753/16" bore · 1.75" gauge$110.20In stock - Shrink fit holder
CAT40-SD018-1603/16" bore · 6.30" gauge$395.42Ships from Pioneer - ER32 collet chuck + collet
CAT40-ER32-0106ER32 · 1.06" gaugeER32-0187ER32 3/16" collet$174.37In stock