V32007S
Ø 5/16"3 FL7/16" LOC2" OAL
Photo and drawing
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 5/16"7.938 mm
- tol -.0001" to -.0003"
- Shank Ø
- 5/16"7.938 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 7/16"11.112 mm
- Reach
- 7/16"11.112 mm
- standard (= LOC), no neck
- Overall length
- 2"50.8 mm
- Flutes
- 3
- Helix
- 45°
- Coating
- Stealth
- MoS2
- Material
- N
- Non-ferrous
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings5/16"7.938 mm · 3 FL
| Length | Uncoated | Stealth | Super Stealth |
|---|---|---|---|
| 3/8" LOC · 2" OAL | V3200605$59.00 | V3200605S$65.00 | V3200605SS$66.00 |
| 7/16" LOC · 2" OAL | V32007$51.00 | V32007S$57.00this | V32007SS$58.00 |
| 7/16" LOC · 2-1/2" OAL | V3200708$69.00 | V3200708S$77.00 | V3200708SS$79.00 |
| 7/16" LOC · 4" OAL | V320070$79.00 | V320070S$89.00 | V320070SS$91.00 |
| 1/2" LOC · 2" OAL | V32008$51.00 | V32008S$57.00 | V31808SS$51.00 |
| 3/4" LOC · 2-1/2" OAL | V32012$60.00 | V32012S$68.00 | V31812SS$63.00 |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 5/16" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM031-01755/16" bore · 1.75" gauge$104.76In stock - Shrink fit holder
CAT40-SD031-1605/16" bore · 6.30" gauge$383.82Ships from Pioneer - ER32 collet chuck + collet
CAT40-ER32-0106ER32 · 1.06" gaugeER32-0312ER32 5/16" collet$174.37In stock