V3642035SS
Ø 1"3 FL1-1/4" LOC7" OAL
Drawing · generated from specs
SpecificationsEvery value as published by Destiny Tool
- Cutting Ø
- 1"25.4 mm
- tol -.0001" to -.0003"
- Shank Ø
- 1"25.4 mm
- standard (= cutting Ø) · tol +.000" to -.0003"
- Length of cut
- 1-1/4"31.75 mm
- Reach
- 4-3/8"111.125 mm
- neck Ø .960"24.384 mm (standard)
- Overall length
- 7"177.8 mm
- Flutes
- 3
- Helix
- 45°
- Coating
- Super Stealth
- DLC (Diamond-Like Carbon)
- Material
- N
- Non-ferrous
- Tool material
- Solid carbide
- End
- Square
- single end
Other lengths and coatings, holders
Same geometry, other lengths and coatings1"25.4 mm · 3 FL
| Length | Uncoated | Stealth | Super Stealth |
|---|---|---|---|
| 1-1/4" LOC · 5" OAL | V3642022$811.00 | — | V3642022SS$842.00 |
| 1-1/4" LOC · 6" OAL | V364200$933.00 | V364200S$963.00 | V364200SS$970.00 |
| 1-1/4" LOC · 7" OAL | V3642035$1,095.00 | V3642035S$1,129.00 | V3642035SS$1,136.00this |
| 1-1/4" LOC · 8" OAL | V3642000$1,170.00 | V3642000S$1,207.00 | V3642000SS$1,215.00 |
| 1-1/4" LOC · 12" OAL | V36420000$1,676.00 | V36420000S$1,731.00 | V36420000SS$1,738.00 |
| 1-1/2" LOC · 4" OAL | V36424$646.00 | V36424S$670.00 | V36424SS$675.00 |
Assembly · view BGrab a holder for that end mill.Why not? Same Ø 1" shank, matched bore. Pick your spindle.
Your spindle
- End mill adapter
CAT40-EM100-01751" bore · 1.75" gauge$93.89In stock - Shrink fit holder
CAT40-SD100-1601" bore · 6.30" gauge$373.16Ships from Pioneer - ER40 collet chuck + collet
CAT40-ER40-0250ER40 · 2.50" gaugeER40-1000ER40 1" collet$194.23Ships from Pioneer