JEM # SCH-14170551417055
BT40 TENDO Silver hydraulic chuck, 8 mm, 90 mm gaugeBT40Bore 8 mm90 mm GLCoolant thru
SpecificationsFrom SCHUNK's catalog
- Taper
- BT40
- Type
- Hydraulic chuck
- Line
- TENDO Silver
- Bore
- 8 mm
- Gauge length
- 90 mm
- from the gauge line
- Nose Ø
- 28 mm
- Coolant
- Coolant thru
- Balance
- G2.5 @ 25,000 RPM
Goes with itNamed in SCHUNK's catalog
9205650TENDO hex wrench, SW 5 × 100 mm, cross handle$9.00
Sleeves and other versions
Retention knob for BT40The knob depends on your machine, not the holder. Find yours by builder.Find by machine →
Intermediate sleeves for a 8 mm bore12 GZB-S sleeves: clamp a smaller shank in this chuck
All with filters →| Part no. | Tool shank | Type | Stock | Price | Add |
|---|---|---|---|---|---|
| 206237 | 1 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $264.00 | |
| 206242 | 1.5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $264.00 | |
| 206247 | 2 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $264.00 | |
| 206252 | 2.5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $264.00 | |
| 206257 | 3 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 217955 | 1/8" | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206262 | 3.5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206267 | 4 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206272 | 4.5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206277 | 5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206282 | 5.5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 | |
| 206287 | 6 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $209.00 |
BT40 TENDO Silver hydraulic chucks, every bore and length7 in all
| Gauge | 6 mm | 8 mm | 10 mm | 12 mm | 16 mm | 20 mm | 32 mm |
|---|---|---|---|---|---|---|---|
| 90 mm | 1417054$310.00 | 1417055$310.00this | 1417056$310.00 | 1417057$310.00 | 1417058$310.00 | 1417060$310.00 | — |
| 100 mm | — | — | — | — | — | — | 1417062$310.00 |