JEM # SCH-14170601417060
BT40 TENDO Silver hydraulic chuck, 20 mm, 90 mm gaugeBT40Bore 20 mm90 mm GLCoolant thru
SpecificationsFrom SCHUNK's catalog
- Taper
- BT40
- Type
- Hydraulic chuck
- Line
- TENDO Silver
- Bore
- 20 mm
- Gauge length
- 90 mm
- from the gauge line
- Nose Ø
- 42 mm
- Coolant
- Coolant thru
- Balance
- G2.5 @ 25,000 RPM
Goes with itNamed in SCHUNK's catalog
9205650TENDO hex wrench, SW 5 × 100 mm, cross handle$9.00
Sleeves and other versions
Retention knob for BT40The knob depends on your machine, not the holder. Find yours by builder.Find by machine →
Intermediate sleeves for a 20 mm bore48 GZB-S sleeves: clamp a smaller shank in this chuck
All with filters →Type
| Part no. | Tool shank | Type | Stock | Price | Add |
|---|---|---|---|---|---|
| 207920 | 3 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
 217920 | 3 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 | |
| 224434 | 1/8" | Coolant-proof sleeve | Ships from SCHUNK | $186.00 | |
| 217880 | 1/8" | Peripheral-cooling sleeve | Ships from SCHUNK | $186.00 | |
| 207921 | 4 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
| 217921 | 4 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 | |
| 224435 | 3/16" | Coolant-proof sleeve | Ships from SCHUNK | $186.00 | |
| 217881 | 3/16" | Peripheral-cooling sleeve | In stock | $186.00 | |
| 207922 | 5 mm | Coolant-proof sleeve | Ships from SCHUNK | $120.00 | |
| 217922 | 5 mm | Peripheral-cooling sleeve | Ships from SCHUNK | $132.00 |
BT40 TENDO Silver hydraulic chucks, every bore and length7 in all
| Gauge | 6 mm | 8 mm | 10 mm | 12 mm | 16 mm | 20 mm | 32 mm |
|---|---|---|---|---|---|---|---|
| 90 mm | 1417054$310.00 | 1417055$310.00 | 1417056$310.00 | 1417057$310.00 | 1417058$310.00 | 1417060$310.00this | — |
| 100 mm | — | — | — | — | — | — | 1417062$310.00 |