JEM # SCH-205144205144
BT40 TENDO Platinum hydraulic chuck, 5/8", 3.54" gaugeBT40Bore 5/8"3.54" GLCoolant thru
SpecificationsFrom SCHUNK's catalog
- Taper
- BT40
- Type
- Hydraulic chuck
- Line
- TENDO Platinum
- Bore
- 5/8"
- Gauge length
- 3.54"
- from the gauge line
- Nose Ø
- 1.50"
- Coolant
- Coolant thru
- Balance
- G2.5 @ 25,000 RPM
Goes with itNamed in SCHUNK's catalog
9205650TENDO hex wrench, SW 5 × 100 mm, cross handle$9.00
Other versions
Retention knob for BT40The knob depends on your machine, not the holder. Find yours by builder.Find by machine →BT40 TENDO Platinum hydraulic chucks, every bore and length18 in all
| Gauge | 6 mm | 1/4" | 8 mm | 3/8" | 10 mm | 12 mm | 1/2" | 5/8" | 16 mm | 3/4" | 20 mm | 32 mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 83 mm | — | — | — | — | — | — | — | — | — | — | — | 204465$530.00 |
| 90 mm | 204440$530.00 | — | 204441$530.00 | — | 204442$530.00 | 204443$530.00 | — | — | 204444$530.00 | — | 204445$530.00 | — |
| 3.54" | — | 205140$530.00 | — | 205142$530.00 | — | — | 205143$530.00 | 205144$530.00this | — | 205145$530.00 | — | — |
| 140 mm | 204446$940.00 | — | 204447$940.00 | — | 204448$940.00 | 204449$940.00 | — | — | 204450$940.00 | — | 204451$940.00 | — |