JEM # SCH-205653205653
BT30 TENDO Platinum hydraulic chuck, 10 mm, 4.00" gaugeBT30Bore 10 mm4.00" GLCoolant thru
SpecificationsFrom SCHUNK's catalog
- Taper
- BT30
- Type
- Hydraulic chuck
- Line
- TENDO Platinum
- Bore
- 10 mm
- Gauge length
- 4.00"
- from the gauge line
- Nose Ø
- 30 mm
- Coolant
- Coolant thru
- Balance
- G2.5 @ 25,000 RPM
Goes with itNamed in SCHUNK's catalog
9205650TENDO hex wrench, SW 5 × 100 mm, cross handle$9.00
Other versions
Retention knob for BT30The knob depends on your machine, not the holder. Find yours by builder.Find by machine →BT30 TENDO Platinum hydraulic chucks, every bore and length21 in all
| Gauge | 6 mm | 1/4" | 8 mm | 3/8" | 10 mm | 12 mm | 1/2" | 16 mm | 3/4" | 20 mm |
|---|---|---|---|---|---|---|---|---|---|---|
| 2.00" | 205631$351.00 | 205641$351.00 | 205632$351.00 | 205643$351.00 | 205633$351.00 | 205634$351.00 | 205644$351.00 | — | 28003669$351.00 | 28003673$351.00 |
| 90 mm | — | — | — | — | — | — | — | 205635$351.00 | — | 205636$351.00 |
| 3.54" | — | — | — | — | — | — | — | — | 28003251$351.00 | — |
| 4.00" | 205651$360.00 | 205661$360.00 | 205652$360.00 | 205663$360.00 | 205653$360.00this | 205654$360.00 | 205664$360.00 | — | 205666$360.00 | 205656$360.00 |